View SRM-2016_254309.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Advanced Data Sheet
Product Description
The Stanford Microdevices' SRM-2016 is a high linearity active mixer for use in a wide variety of communication systems covering the 1700-2000 MHz frequency bands. This device operates from a single 5V supply and provides 11dB of conversion gain while requiring only 0dBm input to the integrated LO driver. The SRM-2016 also includes an integrated on chip IF amplifier and is fabricated using silicon germanium device technology. The SRM-2016 incorporates internal matching on each RF, IF, and LO port to enhance ease of use and to reduce the number of external components required. The RF and LO ports can be driven differential or single ended. Each broadband port has been designed to minimize performance degradation while operating into highly reactive components such as SAW filters.
SRM-2016
1700 - 2000 MHz High Linearity Silicon Germanium Active Receive Mixer
16 pin TSSOP with Exposed Pad Package Body: 0.20 x 0.17 x 0.04 (inches) 5.0 x 4.4 x 1.0 (mm)
Functional Block Diagram
IFP VCC VEE RFP RFN VEE VCC L1 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 IFN VCC VEE LOP LON VEE VCC L2
Product Features
* * * * * * *
Active mixer with conversion gain No need for separate external LO driver Low LO drive level required to drive mixer RF and LO ports may be driven single-ended Single supply operation (+5V) High LO-RF isolation Broadband resistive 50 impedances on all three ports
Applications
* *
Digital and spread spectrum communication systems 1700-2000 MHz transceivers for base station infrastructure equipment
Key Specifications
Parameters RF Frequency Range IF Frequency Range Input IP3 Input P1dB Conversion Gain SSB Noise Figure RF1 = RF2 = -17 dBm/tone Test Conditions (VCC=5.0V, I=150mA, T=25C) Unit MHz MHz dBm dBm dB dB Min. 1700 10 200 +17 +4 11 14 Typ. Max. 2000 300
The information provided herein is believed to be reliable at press time. Stanford Microdevices assumes no responsibility for inaccuracies or ommisions. Stanford Microdevices assumes no responsibility for the use of this information, and all such information shall be entirely at the user's own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Stanford Microdevices does not authorize or warrant any Stanford Microdevices product for use in life-support devices and/or systems. Copyright 2000 Stanford Microdevices, Inc. All worldwide rights reserved.
522 Almanor Ave., Sunnyvale, CA 94086
Phone: (800) SMI-MMIC 1
http://www.stanfordmicro.com 5/01/01 rev 7.0
Advanced Data Sheet 650 0+] 5HFHLYH 0L[HU
Absolute Maximum Ratings
Parameters Supply Voltage LO Input RF Input Operating Temperature Storage Temperature Value +6.0 +10 +15 -40 to +85 -65 to +150 Unit VDC dBm dBm C C
Test Conditions
VCC TA RF Input LO Input +5.0V +25C -40 dBm @ 1880 MHz 0 dBm @ 1680 MHz
Product Specifications - AC Performance
Parameters RF Frequency Range IF Frequency Range Input IP3 Input P1dB Conversion Gain SSB Noise figure RF Return Loss LO Return Loss IF Return Loss LO Drive RF1 = RF2 = -17 dBm/tone Additional Test Conditions Unit MHz MHz dBm dBm dB dB dB dB dB dBm -3 Min. 1700 10 200 +17 +4 11 14 14 14 14 0 +3 Typ. Max. 2000 300
Product Specifications - Isolation Performance
Parameters Leakage (LO-RF) Leakage (LO-IF) Additional Test Conditions Unit dBm dBm Min. Typ. -60 -30 Max.
Product Specifications - Miscellaneous
Parameters Supply Voltage Supply Current Thermal Resistance Additional Test Conditions Unit V mA C/W Min. +4.75 Typ. +5.0 150 TBD Max. +5.25
The information provided herein is believed to be reliable at press time. Stanford Microdevices assumes no responsibility for inaccuracies or ommisions. Stanford Microdevices assumes no responsibility for the use of this information, and all such information shall be entirely at the user's own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Stanford Microdevices does not authorize or warrant any Stanford Microdevices product for use in life-support devices and/or systems. Copyright 2000 Stanford Microdevices, Inc. All worldwide rights reserved.
522 Almanor Ave., Sunnyvale, CA 94086
Phone: (800) SMI-MMIC 2
http://www.stanfordmicro.com 5/01/01 rev 7.0
Advanced Data Sheet 650 0+] 5HFHLYH 0L[HU
Typical Device Performance
Conversion Gain
V CC = 5.0V, LO = 0dBm , RFIN = -20dBm , IF = 200MHz 13 0 5 Return Loss (dB) 12 Gain (dB) 10 15 20 25 1.86 1.88 RF Frequency (GHz) 1.90 1.92 1.6
Return Loss at RF Input
V CC = 5.0V
11
10
9 1.84
1.7
1.8 RF Frequency (GHz)
1.9
2
Return Loss at LO Input
V CC = 5.0V 0 5 5 Return Loss (dB) 15 20 25 30 35 40 1.5 1.6 1.7 1.8 1.9 2 LO Frequency (GHz) 25 140 160 Return Loss (dB) 10 10 15 20 0
Return Loss at IF Input VCC = 5.0V
180
200
220
240
260
IF Frequency (MHz)
The information provided herein is believed to be reliable at press time. Stanford Microdevices assumes no responsibility for inaccuracies or ommisions. Stanford Microdevices assumes no responsibility for the use of this information, and all such information shall be entirely at the user's own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Stanford Microdevices does not authorize or warrant any Stanford Microdevices product for use in life-support devices and/or systems. Copyright 2000 Stanford Microdevices, Inc. All worldwide rights reserved.
522 Almanor Ave., Sunnyvale, CA 94086
Phone: (800) SMI-MMIC 3
http://www.stanfordmicro.com 5/01/01 rev 7.0
Advanced Data Sheet 650 0+] 5HFHLYH 0L[HU
Pin Out Description
Pin # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Function IFP VCC VEE RFP RFN VEE VCC L1 L2 VCC VEE LON LOP VEE VCC IFN Description IF output, positive terminal Positive supply (+5V) Ground RF input, positive terminal RF input, negative terminal Ground Positive supply (+5V) External inductor terminal External inductor terminal Positive supply (+5V) Ground LO input, negative terminal LO input, positive terminal Ground Positive supply (+5V) IF output, negative terminal Nominal DC voltage is 1.6V. Output should be AC-coupled. Nominal DC voltage is 2.4V. (Internally biased) Input should be ACcoupled. Nominal DC voltage is 2.4V. (Internally biased) Input should be ACcoupled. Nominal DC voltage is 5V, provided through off chip inductors. Nominal DC voltage is 5V, provided through off chip inductors. Nominal DC voltage is 2.1V. (Internally biased) Input should be ACcoupled. Nominal DC voltage is 2.1V. (Internally biased) Input should be ACcoupled. Additional Comments Nominal DC voltage is 1.6V. Output should be AC-coupled
The information provided herein is believed to be reliable at press time. Stanford Microdevices assumes no responsibility for inaccuracies or ommisions. Stanford Microdevices assumes no responsibility for the use of this information, and all such information shall be entirely at the user's own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Stanford Microdevices does not authorize or warrant any Stanford Microdevices product for use in life-support devices and/or systems. Copyright 2000 Stanford Microdevices, Inc. All worldwide rights reserved.
522 Almanor Ave., Sunnyvale, CA 94086
Phone: (800) SMI-MMIC 4
http://www.stanfordmicro.com 5/01/01 rev 7.0
Advanced Data Sheet 650 0+] 5HFHLYH 0L[HU
Part Number Ordering Information Caution: ESD Sensitive
Appropriate precaution in handling, packaging and testing devices must be observed.
Part Number SRM-2016 Reel Size TBD Devices/Reel TBD
Part Symbolization
The part will be symbolized with a "TBD" marking designator on the top surface of the package.
Package Dimensions ("16" Package)
NOTE 1. PACKAGE BODY SIZES EXCLUDE MOLD FLASH PROTRUSIONS OR GATE BURRS 2. TOLERANCE 0.1 mm UNLESS OTHERWISE SPECIFIED 3. COPLANARITY : 0.1 mm 4. CONTROLLING DIMENSION IS MILLIMETER. CONVERTED INCH DIMENSIONS ARE NOT NECESSARILY EXACT. 5. FOLLOWED FROM JEDEC MO-153
SYMBOLS
DIMENSIONS IN MILLIMETERS
DIMENSIONS IN INCHES
A A1 A2 b C D D1 E E1 E2 e L y
MIN --- 0.00 0.80 0.19 0.09 4.90 --- --- 4.30 --- --- 0.45 --- 0
NOM --- --- 1.00 --- --- 5.00 2.80 6.40 4.40 2.80 0.65 0.60 --- ---
MAX 1.15 0.10 1.05 0.30 0.20 5.10 --- --- 4.50 --- --- 0.75 0.10 8
MIN --- 0.000 0.031 0.007 0.004 0.193 --- --- 0.169 --- --- 0.018 --- 0
NOM --- --- 0.039 --- --- 0.197 0.110 0.252 0.173 0.110 0.026 0.024 --- ---
MAX 0.045 0.004 0.041 0.012 0.008 0.201 --- --- 0.177 --- --- 0.030 0.004 8
12(4X)
Test PCB Pad Layout
1.25
0.25 0.74 0.4 0.74 3.0
3.0
0.33 via
0.7
0.9
6.9
- Indicates metalization
all units are in mm - vias connect pad to underlying ground plane
The information provided herein is believed to be reliable at press time. Stanford Microdevices assumes no responsibility for inaccuracies or ommisions. Stanford Microdevices assumes no responsibility for the use of this information, and all such information shall be entirely at the user's own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Stanford Microdevices does not authorize or warrant any Stanford Microdevices product for use in life-support devices and/or systems. Copyright 2000 Stanford Microdevices, Inc. All worldwide rights reserved.
522 Almanor Ave., Sunnyvale, CA 94086
Phone: (800) SMI-MMIC 5
http://www.stanfordmicro.com 5/01/01 rev 7.0
Advanced Data Sheet
Demo Test Board Schematic
+5V CON 1 2 Lfil VCC C7 C3 VCC IFP VCC A8 A9 C4 L3 VEE RFP RFN C5 VEE VCC L1 C20 VCC A2 A10 SRM-2016 IFN VCC VEE LOP LON VEE VCC L2 VCC C21 C12 A12 L4 C11 A11 C9 VCC C1 A7
650 0+] 5HFHLYH 0L[HU
L1
L2
C6
VCC
VCC
C10
Bill of Materials
Component Designator A10 A7, A8, A12 CON A9, A11 A2 Lfil C1, C3, C20, C21 C6, C10 C7, C9 C4, C5 C11, C12 L1, L2 L3 L4 1:1 1:1 1uH 6.8pF 100pF 120pF 2.2pF 3.3pF 100nH 18nH 15nH Value Qty 1 3 1 2 1 1 4 2 2 2 2 2 1 1 Vendor SMDI Johnson Components Digikey Panasonic Mini-Circuits Digikey Venkel Venkel Venkel Venkel Venkel TOKO TOKO TOKO Part Number SRM-2016 142-0701-851 S1212-36-ND EHF-FD1619 TC1-1 PCD1008CT-ND C0603COG500-6R8CNE C0603COG500-101JNE C0603COG500-121JNE C0603COG500-2R2CNE C0603COG500-3R3CNE LL1608-FSR10J LL1608-FS18NJ LL1608-FS15NJ Description SiGe Receive Mixer SMA connector, end launch with tab, for 62 mil thick board 2-pin header RF transformer IF transformer Inductor, 1210 footprint, min. 200mA rating Capacitor, 0603 footprint Capacitor, 0603 footprint Capacitor, 0603 footprint Capacitor, 0603 footprint Capacitor, 0603 footprint Inductor, 0603 footprint, high Q series Inductor, 0603 footprint, high Q series Inductor, 0603 footprint, high Q series
The information provided herein is believed to be reliable at press time. Stanford Microdevices assumes no responsibility for inaccuracies or ommisions. Stanford Microdevices assumes no responsibility for the use of this information, and all such information shall be entirely at the user's own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Stanford Microdevices does not authorize or warrant any Stanford Microdevices product for use in life-support devices and/or systems. Copyright 2000 Stanford Microdevices, Inc. All worldwide rights reserved.
522 Almanor Ave., Sunnyvale, CA 94086
Phone: (800) SMI-MMIC 6
http://www.stanfordmicro.com 5/01/01 rev 7.0
Advanced Data Sheet 650 0+] 5HFHLYH 0L[HU
Demo Test Board (Fully Assembled PCB)
A7
1.85
A2 C7 C3 C4 L3 A8 C5 C20 L1 C6 C9 A10
SRM2016
A9
C1 L4
C11
A11
C12 C21 L2 C10 A12
Lfil CON 2 1
1.85
Note: Dimensions in inches
The information provided herein is believed to be reliable at press time. Stanford Microdevices assumes no responsibility for inaccuracies or ommisions. Stanford Microdevices assumes no responsibility for the use of this information, and all such information shall be entirely at the user's own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Stanford Microdevices does not authorize or warrant any Stanford Microdevices product for use in life-support devices and/or systems. Copyright 2000 Stanford Microdevices, Inc. All worldwide rights reserved.
522 Almanor Ave., Sunnyvale, CA 94086
Phone: (800) SMI-MMIC 7
http://www.stanfordmicro.com 5/01/01 rev 7.0

▲Up To Search▲

Price & Availability of SRM-2016

	To Download SRM-2016 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .